Inventions Needed Boat trailer with second set of fold down wheels
These would be cocking axles that pivot a total of 90 degrees to cock into place. One of them would indeed be considered a spare tire.
This would be a good system to have in place for moving a trailer over soft ground. But also in case one of the bearings, which are prone to water damage, were to fail!
And it would indeed be a safety or fail safe feature.
Another interesting boat modification would be a flat bottom boat that had a v formation running down under the center of it. It could be a hinge V so that it could indeed be retracted to flat bottom formation. So indeed it would be a transforming hull. The V for rougher water and the flat bottom for shallow rivers.
What else would be interesting would be twin jet drive ailerons that unfolded down from working flat bottom boat to hydroplane boat!
*****'
Another invention needed is a re thread kit for an AR-15 with a plastic "upper Receiver" They should never be built with plastic threads! At the very least there should be a brass thread collar formed into that upper receiver! And I am one known to never strip threads!
Musky Watch by ThomasPaulMurphy
See additional Watches online at Zazzle
Thomas Paul Murphy
Originally published on 12 06 2013 at: www.themilwaukeeandwisconsinnews.blogspot.com
Copyright 2013 Thomas Paul Murphy
These would be cocking axles that pivot a total of 90 degrees to cock into place. One of them would indeed be considered a spare tire.
This would be a good system to have in place for moving a trailer over soft ground. But also in case one of the bearings, which are prone to water damage, were to fail!
And it would indeed be a safety or fail safe feature.
Another interesting boat modification would be a flat bottom boat that had a v formation running down under the center of it. It could be a hinge V so that it could indeed be retracted to flat bottom formation. So indeed it would be a transforming hull. The V for rougher water and the flat bottom for shallow rivers.
What else would be interesting would be twin jet drive ailerons that unfolded down from working flat bottom boat to hydroplane boat!
*****'
Another invention needed is a re thread kit for an AR-15 with a plastic "upper Receiver" They should never be built with plastic threads! At the very least there should be a brass thread collar formed into that upper receiver! And I am one known to never strip threads!
Musky Watch by ThomasPaulMurphy
See additional Watches online at Zazzle
Thomas Paul Murphy
Originally published on 12 06 2013 at: www.themilwaukeeandwisconsinnews.blogspot.com
Copyright 2013 Thomas Paul Murphy
No comments:
Post a Comment